Why can't the fuel burning engine ignite
People often ask why the fuel burning engine doesn't light up, because the engine has a problem. If the ignition fails, the product may be shut down for safety, so do not force it to start blindly, but ask professional technicians to remove the problem before starting. But what reasons do you know? Then let's give you a detailed explanation.
Fault phenomenon: after the fuel burner is powered on, the product cannot be started, and the control box lights up the fault light.
Possible causes:
1. The control box may be faulty.
2. It may be that the motor cannot be started due to a problem. In addition to the possible damage to the motor coil or capacitor, it may also be a bearing problem, or it may be that the fan on the motor is stuck due to the intake of foreign matters.
3. It may be that the bearing of the oil pump is too tight and the motor belt cannot move. It may be that the oil pump is rusted due to the moisture in the fuel. If this phenomenon is found, in addition to solving the problem of the oil pump, attention should be paid to the cleanliness of the fuel. Please clean the oil tank. If the oil tank has a drain outlet, please drain the dirt and moisture from the bottom of the oil tank. If the fault lamp lights up due to some faults in the last operation of the combustion engine, other fault causes can be considered.
Fault phenomenon: After the power supply is turned on, it cannot be started, but the fault light on the control box does not light up.
Possible causes;
1. Check the fuse of the power supply and check whether the thermostat is properly adjusted.
2. Check whether the control box is firmly inserted on the wiring base, and check whether the power wiring is loose.
3. The control box may be faulty.